Home > News > Content
How To Choose Galvanized Stainless Steel Pipe Straight Tee
- Dec 19, 2017 -

How to choose galvanized stainless steel pipe straight tee

Galvanized stainless steel pipe straight tee also named of stainless steel pipe equal tee. Please check the following specification.
Material: stainless steel ASTM 304,316, 321 etc.
Standard: ANSI/ ASME B16.9, DIN, JIS, GOST etc.
Dimension: 1/2” to 48”.
Wall thickness: sch5s, sch10s, sch20, sch40, std, xs, sch80.
Package: plywood pallet, plywood case, carton+plywood pallet or according to customers’ request.
Inspection: inspection by ourselves or the third party inspection.
Surface treatment: pickling.
Steel pipe straight tee has very important function in pipelines. Choosing a suitable stainless steel pipe straight tee directly influence the safety of pipelines and cost of whole project. How can we to choose?
Generally the stainless steel pipe straight tee is supported to the stainless steel pipes. Firstly the diameter of tee must be fully same as pipe’s, then the wall thickness also same as pipe’s.  Such as if the diameter of pipe is 10 inch wall thickness is SCH40, the diameter and wall thickness of tee must be match with the pipe. At the same time, the material of steel pipe equal tee must be same with the pipes, otherwise they can not be welded together.

slide-home2a.jpg

stainless steel equal tee drawing.jpg

The material of stainless steel straight tee includes many types, 304, 316, 304L, 316L, 321, 202 etc. 304, 304L, 316, 316L are more better than 321 and 202 no matter the chemical analysis and mechanical capacity. Our company always to choose the top quality material to produce pipe fitting and flange which provide the guarantee for good quality of finished products at the first step. We sincerely hope that our products can be applied in pipelines of world wide.