Where to buy stainless steel pipe fittings
Where to buy stainless steel pipe fittings? Certainly choosing China manufacturer of butt weld pipe fittings Beijing Metleader Pipeline Technology Inc. www.metleader.com with professionally and abundant manufacturing experience more than 36 years.
What is stainless steel pipe fittings? They are components of pipes usually used in oil, gas, power, ship building, chemical etc. according to different international standards such as ANSI/ ASME B16.5, DIN, JIS, and EN. The raw material commonly includes ASTM A403 316/316L, 304/304L, 321, 317/317L etc. The main products refer to elbow 90 degree, elbow 45 degree, elbow 180 degree long/ short radius, equal tee, reduced tee, concentric reducer, eccentric reducer and cap.
The advantages of stainless steel pipe fittings is resistance to corrosion. So they are generally installed to the pipelines with corrosivity. The following are some pictures of stainless steel pipe fittings. It is usually based on carbon steel, which increases the ratio of Cr, Ni and other alloys, which can reach over 20%. The common types of steel are: 304,304 L, 321,316,316 L.
Features of stainless steel material: stainless steel strength, toughness index is one of the best in all kinds of steel, the most prominent advantage is corrosion resistant, in chemical industry, papermaking and other corrosive strong occasion must be used stainless steel, of course, the cost is also higher.
The Operation Key of stainless steel pipe fittings:
1. When installing, the stainless steel elbow can be installed directly on the pipe by the connection mode, and installed according to the position used. In general, it can be installed in any position of the pipeline, but it needs to be sealed to prevent the leakage phenomenon and affect the normal operation of the pipe.
2. Stainless steel elbow ball valve, globe valve, when the valve is used, only open or fully closed, do not agree to do regulating flow, in order to avoid sealing.
3. Stainless steel elbow, three. Long-term storage should be timely check, often appear the processing surface should be clean, remove dirt, neatly stored in a dry indoor drafty place, it is strictly prohibited stacking or in open air. Always keep the stainless steel elbow dry and ventilated, keep the device clean and tidy, and store it in an accurate way.
Tips: stainless steel pipe fittings need to be aware of a lot of things, users should be used according to certain methods, according to accurate and reasonable methods to use and maintain.
- Types Of Seamless Tubes
- Equal Diameter Tee Is Widely Used
- Standard System Of Elbow Pipe
- Connection Of Flat Welding Flange D...
- How To Choose The Best Bend Tube
- The Characteristics Of Different Di...
- Note On The Use Of Carbon Steel Flange
- What Is Butt Weld Elbow?
- Welding Of Large Diameter Flange
- Precautions For Pipe Bending
- How To Calculate 90 Degree Elbow Di...
- Stainless Steel ASME B16.47 Slip On...
- High Pressure Steel Pipe Fittings
- How To Weld On Flange Fittings
- ANSI 150 Slip On Flange Dimensions
- Galvanized Reducing Tee