Different faces of slip on flange
We are a 36 years old manufacturer of all kinds of flanges, which exported flange and pipefitting products since 2008. Raised face slip on flange is a very hot sale product this year. In our company, the stable product quality is the most important thing, so you can trust us and please feel free to contact us.
There are many flange sealing face type, which are commonly used face are flat face/FF, raised face/ RF, male and female face/MFM, tongue and groove/TG.
Structure of raised face slip on flange is simple, it’s convenient to process and easy to anti corrosion treatment. Because of this raised face slip on flange and gasket contact area is larger, such as improper preload, gasket easy to be extruded sealing surface, also not easy to press tight, sealing performance is poor.Suitable for occasions with low pressure, generally used under the pressure of Pn≤2.5mpa.
MFM has two flange junctions , the one is convex, the other one is concave. Its more difficult than the plane flange to process, but the installation is easier, and can avoid gasket is extruded sealing surface, sealing performance is better than plane sealing surface.
The flange sealing surface of tongue and groove surface is made of a tenon face and a groove face, and the sealing surface is narrower. Due to the blocking of the groove surface, the gasket will not be extruded and pressed, and less subject to erosion and corrosion of the medium. Installation is easy to the middle, the gasket is uniform, sealed and reliable. Applicable to flammable, explosive and toxic media occasions. It is more difficult to replace, because of the narrow gasket.
- Types Of Seamless Tubes
- Equal Diameter Tee Is Widely Used
- Standard System Of Elbow Pipe
- Connection Of Flat Welding Flange D...
- How To Choose The Best Bend Tube
- The Characteristics Of Different Di...
- Note On The Use Of Carbon Steel Flange
- What Is Butt Weld Elbow?
- Welding Of Large Diameter Flange
- Precautions For Pipe Bending
- ANSI B16.9 Carbon Steel Eccentric R...
- 8 Inch Steel Pipe Cap Manufacturer
- How To Ensure The Quality Of 30 Deg...
- Thick 90 Degree Carbon Steel Short ...
- Carbon Steel Equal Tee
- Carbon Steel Long Radius Bend
- Carbon Steel Eccentric Reducer
- Carbon Steel Bend Defect And Water ...
- Carbon Steel Cap
- What Is Seamless Steel Tee